Tag Archives: reusable sanding

The Best Woodworking Tips On The Internet





woodworkersIf you’ve wanted to try your hand at woodworking, you may have had some questions about getting started. It can be hard when you don’t know what you’re doing in the beginning, but trial and error account for a lot. There’s a lot to pick up, so keep reading to discover some important tips to help you start.

It is always a good idea to have a pre-stain conditioner for the wood you’re planning to stain. This will help you to get an even finish when you stain. This is because the conditioners allow stains to penetrate evenly.

TIP! As with anything involving power tools, safety is the number one concern in woodworking. Be sure to follow all safety directions when using power tools.

You can make reusable sanding blocks. First cut 6 blocks from scrap plywood, one for each grit of sandpaper you like to use. Try to be certain that they measure roughly 2.5 inches by 4.75 inches. You can secure the sandpaper better with an adhesive. Start by sticking a block to the cork before cutting the cork with a utility knife. Apply a bit of adhesive to a sheet of sandpaper and place it onto the cork blocks facing down. Trim your sandpaper so that it is even with the corks and label each block appropriately.

Golf Tee

You can simply fix some hinges with a golf tee if you are working on an interior door. Take the door and its hinges off of the frame, then, tapping gently, place golf tees into the screw holes. Get rid of the excess part of the tree by cutting it and put the door back up. The golf tee fills the hole and provides additional material to hold the screw.

TIP! Test an area or scrap wood before using a stain. If you test the stain color first, you will not have any unpleasant surprises.

Keep an eye out for recycled wood. There are several places that use wood and discard scraps that can be useful. Home improvement stores, flooring contractors, and other places often have scrap wood. Use this to your advantage as often as you can, there really is no reason not to. You can save money this way.

Pay attention to anyone that might be looking to unload their home. You can increase the resale price of your house and even make some hobby cash, with small woodworking projects. You can create anything from a new mailbox to refinished cabinetry.

Your eyes are a target for wayward bits of wood. Never forget to wear your goggles in the work area to avoid injury to your eyes. Get a different pair of goggles if you cannot see well with the pair that you have.

TIP! For crosscut guides use a stair gauge. Clamp them to carpenter’s squares and be sure they match the runs and rises of the stair jacks.

There are some important hand tools that you should buy prior to beginning your first woodworking work. Your first tool should be a hammer. A claw hammer is best. Get one that feels good when you hold it. Don’t pick one which is very heavy.

Sanding Block

You can make your own reusable sanding block. A sanding block will make your sanding easier on you and your hands while giving your control. However, you don’t have to purchase an expensive sandpaper holder. Scrap plywood can be turned into a fine holder. You can use these to create sandpaper as well.

TIP! Select the proper wood for any project you do. Some pieces require a durable hardwood, while others can be done with a softer type of wood.

Make sure you have enough lighting in your wood shop. You need bright lights when you are working on a project. This will help you see any areas where extra sanding is necessary. Extra lighting will also make sure that your stain comes out the way you want it to come out.

Stair gauges are great guides for circular saws. A stair gauge’s intended use is to help you match up notches with help from a stair jack. Using both on a carpenter square’s tongue can help guide a circular saw.

Prior to sanding, get the surface wet. This will help to raise the grain of the wood. This will then allow you to get rid of fine scratches. This makes your final product look better. It’ll also save you work in the future.

TIP! If you’re thinking of leasing a new tool you’ve never used, see if the company can teach you how it works. Many times the people who work there will give you a quick demonstration on how to correctly use the tool.

Always go back over your measurements. You might want to check them three times just to ensure that you aren’t wasting money on expensive items. A lot of the time measuring will be where a lot of people make mistakes. Cutting too short or on an angle can completely ruin the wood.

It is possible to make customized sanding blocks. All you need to do is customize the size of your wood. Tape the sandpaper on the block with adhesive. This will give you a custom sanding block for your project.

IN the planning stage of large projects, you should think about possible changes you will want to make in the future. If you are building a structure, will you be adding utilities down the road? If so, be sure that there is ample room for wiring and switches to be installed as well as space for the light to go on the ceiling.

TIP! You shouldn’t be a perfectionist with tape measures. Use story sticks and slowly move to cuts.

Woodworking is an interesting type of art. The information here should be the start of some creative ideas that you can put to use. Whether you are making toys or furniture, you can finally get started. You won’t know what you can do until you try!

pole barn homes